PLA max flow should be around 15mm3/s (according to max flow on default 0.6mm profiles). So the main concept is that the machine can handle printing & vibrations as high as the 0.4 profile speeds and accelerations suggest, but it won't be able to heat up all the plastic with a 0.6mm.įor reference: 0.35 layer height * 0.6mm nozzle * 140mm/s = 29.4mm3/s vs 0.2 layer height * 0.4mm nozzle * 140mm/s = 11.2mm3/s Printing speeds are set as fast as 0.4 default profile but limited down by the Max volumetric speed (which will be the physical limit of the machine I guess). This will affect all print speeds at given 0.3mm layer height and 0.6mm nozzle are quite high. You can play with Max volumetric speed (Filament > Advanced). I have ported the 0.4 profiles to a 0.6 version.Ĭouldn't test the benchy yet, but for mechanical parts the machine works great! Up to its own volumetric flow limits for PLA + default hardware 0.6mm nozzle.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |